ceramic 六级雅思GMAT专八

1.The characteristic and influencing factors of tools wear were analyzed through turning fluorophlogopite machinable ceramics.

对氟云母可加工进加工试验,分析了切中的刀具磨损特性,讨论了影响刀具磨损率的因素。

2.Some ceramic works of art are shown in this exhibition.

这次展览会上展出了一些艺术品。

3.The ceramic plates of air valves against abration, corrosion, dust, dirt, and sand.

阀板耐磨、耐腐蚀、耐固体颗粒侵蚀，寿命长，适合各种气体、液体阀门的密封。

4.After all my care in packing it, many of the ceramics arrived broken.

尽管我包得非常小心,器运到时还是坏了许多。

5.A separate inlet with a ceramic frit is used to aerate the perfusate.

用玻璃料制成的一个独立进口暴露在灌流液中。

6.The surface glossiness of ceramic ware after glazing, especially the metallic sheen of lusterware.

通过往釉面上添加属氧化物而产生属光泽的黏土制品。

7.The high-speed steel tool was not suitable for turning fluorophlogopite,and ceramics tool was ...

氟云母对刀具磨损过程与切属相似。

8.The worn surface morphology of ADZ ceramic was analyzed with a scanning electron microscope.

与去离子水相比,在小牛血清润滑条件下ADZ的摩擦因数和磨损率降低。

9.The features and applications in superprecision turnings of piezoelectric ceramic inching motion devices are introduced.

介绍了压电微动机构的性能特点及在超精密加工中的多种用途。

10.Those ceramics are beautiful.

那些器很好看。

11.Porous ceramic materials on the base of strontium zirconate were developed with zirconium dioxide,baddeleyite powder,and granular polysterol.

采用二氧化锆、斜锆矿粉、碳酸锶及粒状聚苯乙烯制成了锆酸锶多孔材料。

12.Lead is also used in some seramic (ceramic) and vinol (vinyl) products, candles, hair colorings and other goods.

铅也可能被用于器，乙烯基产品，蜡烛，染发剂和其他产品。

13.The effect of process parameters on the electric insulance of micro arc oxidated ceramic coat on aluminium plate is studied.

研究了工艺参数对铝微弧氧化层电绝缘性能的影响规律。

14.In this paper .bridge-indentation method is adopted to precrack in ceramic specimens, and the advantage as well as disadvantage are discussed.

本文首先对桥压法预制原生裂纹进了研究,然后针对桥压法存在的问题提出了一种简便而有效的材料原生裂纹的预制方法——静态膨胀法。

15.Writer discusses also the characteristic of silicon nitrid ceramic materials,and chooses this ceramic bearing used in the bottom of the reactor above.

论述了氮化硅材料的特点，选择了氮化硅轴承作为有机硅室温胶搅拌釜底轴承并进了相应设计。

16.In this process,microwave heating is used to make ceramic materials plastifying under a high temperature,so that a good machinability can be achieved.

该方法利用微波加热使材料在较高温度下塑性化,从而获得到较好的加工性。

17.To raise ozone output of ozonator,it demands that ceramic plate materials for ozonator have good dielectric properties and quite high thermal conductivity.

为了提高臭氧发生器的臭氧产量,要求臭氧发生器用的基板材料具有较高的介电性能和热导率。

18.It is extensively practical and profession used in deaerate of raw materials, such as plastics, handicraft product, chemical engineering and porcelain and ceramics...etc.

该机广泛适用于塑胶、工艺品、化工、等原料需脱泡(真空)的各个业.

19.The extract of Sophora japonica L. was processed by inorganic ceramic membrane, and the whole solid, effective ingredinent and flux of mebrane were examined.

用孔径为0.2μm的无机膜对槐米提取液进微滤,对提取液微滤前后在总固体、性状、指标性成分、膜通量等方面的变化进对比分析。

20.It has been studied that concentrated raw ceramics single -material-china stone ultrafines is mixed and homogenized by technology of computerized process control in this paper.

本文对经精选的单一原料—石,采用以计算机监控的掺和与均化技术,进的试验研究进了论述。