After ball milling, it can see the better dispensability and lower turn-on field.
经球磨后,可大略看出分散较佳之浆料,起始场发射电场有往低的趋势。
After ball milling, it can see the better dispensability and lower turn-on field.
经球磨后,可大略看出分散较佳之浆料,起始场发射电场有往低的趋势。
According to the falling body weight,shape and well structure,designed washover milling fishing tool.
根据下落物的重量、形状及井身结构,设计作了套铣打捞器。
Composite W-Cu oxide nanopowder was prepared by spray-drying and milling of ammonium metatungstate(AMT) and cupric nitrate.
采用偏钨酸铵、硝酸铜通过喷雾干燥、焙烧、球磨备纳米氧化钨铜复合粉末。
Blade tools: eyebolt, turning tool, Allen key, screw tap, milling cutter, drill bits, etc.
埃令螺丝(吊环)、圆车刀、六角匙、丝攻、铣刀、钻咀等。
Needle slot on the neilsbed armor plate is usually milled one by one by milling machine controlled manually.
针钢板上的针槽通常是由人控用铣一条条铣出来的,费费时,铣槽精度低。
Our products including End Mills, Machine Taps, Reamers, Center drills, Counterbore, Countersinks, Core drills, HSS tool bits and milling cutters.
直柄、锥柄铣刀、丝锥、中心钻、倒角刀、扩孔钻、铰刀、锥钻、直钻及各类高速钢刀具。
Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.
通过在与进料方向平行的底部底板上铣出一个狭槽来实现压上模具中心的调整。
The white mixture of starting materials turns green after milling, indicating the formation of polyaniline in its doped emeraldine oxidation state.
白色的初始材料混合物在球磨后变成了绿色,这表明,混合物在掺杂苯胺绿氧化状态下形成了聚苯胺。
The problem of synchrodrive for gantry-moving milling machines is researched, and two linear motors as traversing drive mechanism of gantries are applied.
针对龙门移动式镗铣同步伺服问题进行了研究,并用两台直线电动机作为龙门柱纵向进给的传动机构。
Through analyzing and accounting evocable error of tool's transmutation during milling process,the compensatory method to the error in NC machining has been put forward.
通过分析计算数控铣削过程中刀具变形引起的误差,提出对这种误差的补偿方法。
Our main products are VMC machining center, CNC slant bed lathe, CNC and manual toolroom milling machine, high speed spindle, ball screw and other functional spare parts.
集团内其他成员分别为从事机零部件的生产加、产品包装以及国内外贸易方面的经营合动。
Physical processing of APIs, such as granulation, coating or physical manipulation of particle size (e.g. milling, micronizing), should be conducted at least to the standards of this Guide.
原料药的物理过程,如颗粒化,胞衣或颗粒的物理处理(如,磨碎,微粉化)因至少符合本指南的标准。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人审核,其表达内容亦不代表本软件的观点;若发现问题,欢迎向我们指正。