There aren't any slots available until next month.
在下个月之前都没有空位。
There aren't any slots available until next month.
在下个月之前都没有空位。
There are a number of thoughtful slots and pockets for storing things, including a lighted glovebox.
,乐骋有若干深思储存物品空间,包括一个浅手套箱。
Can you slot her into a job in the sales department?
你能把她安排在销售部工作吗?
Put a coin in the slot.
将硬币放入投币口。
When we got the final result of our experiment, everything slotted into place.
我们得到了试验最终结果,一切都吻合。
If you put a coin in the slot of this machine, stamps come out of another slot.
如果你把硬币放进这台器一个投币口,邮票就会从另一个口里出来。
The programme of "front benching pilot tunnel divisional and laminated skewed slot construction" was created.
独创了“正台阶导硐分部分层斜沟施工方案”,该方案具有良好推广应用价值。
It is an important problem to indicate the maximum displacement coefficient ingear slotting tool design process.
确定最大变位系数是插齿刀设计一个重要问。
Please comment whether it's cabrite's skin or fishskin?Good sword!I have one with slot at one side!
请教是藏蜥蜴皮还是鱼皮?好刀!我有一把是单面开!
To predict the slot film-cooing adiabatic effectiveness, a mathematic model was developed based on cohence non-isothermal jet theory.
摘要在伴随非等温射流基础上发展了一种适用于缝气膜冷却绝热温比预估数学模型。
Needle slot on the neilsbed armor plate is usually milled one by one by milling machine controlled manually.
针床钢板上针通常是由人工控制用铣床一条条铣出来,费工费时,铣精度低。
This paper mainly discusses subjects such asprocessing,technology of pole coil wind ing,forming,manufacturing lead,punching,dove-tail groove,insulating,heat pr essing,encircling slot,etc.
本文主要研究了磁极线圈绕线、整型、引线制做、鸽尾冲制、绝缘、热压、围带加工工艺等方面内容。
The toolholder is used for outer slotting and the tool bar for inner slotting and for slotting the keyway.
床附有电磁自动抬刀刀架和刀杆。刀架用天外插削,刀杆用于内插削和插键。
The main component of knitting slot machine is "neilsbed" and there are lots of minute needle slots used to place needles.
针主要部件为“针床”,长方形针床钢板(针板)间开有许多细密“针”,用于安装放置“针”。
Stepped and staggered sidecutter is the special miller for machining root rotor slot by Beijing Beizhong Steam Turbine Generator Co.
台阶错齿三面刃铣刀是北京北重汽轮有限责任公司加工叶根转子专用铣刀。
Die centering in press is obtained by milling a slot on the bottom subplate parallel to the direction of the feed.
通过在与进料方向平行底部底板上铣出一个狭来实现压床上模具中心调整。
Compared with the conventional presplitting methods, the shaped charge is obviously more effective in presplitting blasting and especially useful in controlling the presplitting slots.
聚能预裂爆破与普通预裂爆破相比,爆破效果明显提高,能有效地控制预裂缝扩展。
Fitting is used for autobicycle start electrical machiney, Car forced convection air heater, Electric tool electrical machiney waits for miniature electrical machiney rotor slot insert empire paper.
适用于摩托车起动电、汽车暖风、电动工具电等微型电转子插入绝缘纸。
Each frame to doors fitted with a mortice lock is to be slotted for bolt, correctly positioned and to have a mortice cap welded on at back of perforation.
为匹配安装暗锁门,每个框要为锁舌开,通过在其后打孔,在内焊接榫帽,使其正确就位。
Methods dip 2% lidocaine or impede narcosis, use the acuity exonerative plane root slot cut endodontium,after drying overlay thin hydrochloride zinc and than using the zinc phosphate to mount.
方法用2%利多卡因浸润或阻滞麻醉,用锐利挖器平根管口切断牙髓,拭干后用氢氧化钙糊剂覆盖根髓断面,硬固后,覆薄层氧化锌粘固粉,用磷酸锌粘固粉封洞。
声明:以上例句、词性分类均由互联网资源自动生成,部分未经过人工审核,其表达内容亦不代表本软件观点;若发现问,欢迎向我们指正。